Specification:
Item Type: PV DC Surge Protector
Material: PC Flame Retardant
Maximum Continuous Working Voltage Uc: 1000V DC
Nominal Discharge Current In: 20kA (8/20?s)
Maximum Discharge Current Imax: 40kA (8/20?s)
Voltage Protection Level Up: Less than or Equal to 2.0kV
Number of Poles: 2P
Protection Class: IP20
Working Temperature: -40? to 80?
Humidity: Less than or Equal to 90% (Average 25?)
PackageList:
1 xDC Surge Protector
Notice:
1. The power must be cut off before installation, and live operation is strictly prohibited.
2. Please connect as shown in the installation diagram during installation, where + is the positive wire and ? is the negative wire. Do not make wrong connections. After the installation is complete, close the automatic circuit breaker () switch to check whether the working state is normal.
Item Type: PV DC Surge Protector
Material: PC Flame Retardant
Maximum Continuous Working Voltage Uc: 1000V DC
Nominal Discharge Current In: 20kA (8/20?s)
Maximum Discharge Current Imax: 40kA (8/20?s)
Voltage Protection Level Up: Less than or Equal to 2.0kV
Number of Poles: 2P
Protection Class: IP20
Working Temperature: -40? to 80?
Humidity: Less than or Equal to 90% (Average 25?)
PackageList:
1 xDC Surge Protector
Notice:
1. The power must be cut off before installation, and live operation is strictly prohibited.
2. Please connect as shown in the installation diagram during installation, where + is the positive wire and ? is the negative wire. Do not make wrong connections. After the installation is complete, close the automatic circuit breaker () switch to check whether the working state is normal.