Surge Protective Device, Modular Structure PC Flame Retardant Stable Performance DC1000V Photovoltaic Surge Protector for Home

1. [RAPID RESPONSE] With nanosecond response speed, the protector will immediately open to introduce surge overvoltage to the ground when there is stroke or surge overvoltage occurs. 2. [RAIL INSTALLATION] This 2P surge protective device is installed with standard 35MM guide rail, which is very simple to install, can be used together with the circuit breaker of the distribution box. 3. [FLAME RETARDANT] The photovoltaic surge protector adopts PC flame retardant housing, highly safe and reliable to use. 4. [STABLE PERFORMANCE] Use precise electronic components, with longer service life and more stable performance, this surge protector will help you to complete your work more effectively. 5. [WIDE APPLICATION] The photovoltaic surge protector can be widely used in home, office building, school, shopping mall, etc. Spec: Item Type: Surge Protective Device Material: PC Flame Retardant Model: LT1 40 Rated Voltage Ue: 1000V DC Maximum Continuous Working Voltage Uc: 1060V DC Nominal Discharge Current In: 20kA (8/20?s) Maximum Discharge Current Imaximum: 40kA (8/20?s) Voltage Protection Up: ?3.2kV Number of Poles: 2P Protection Grade: IP20 Working Temperature: -40? to 80?, Humidity: ?90% (at 25? on average) How to Use: Connect according to the wiring diagram and use. Package List: 1 x Surge Protective Device 1 x Slide Notice: 1. The power supply must be cut off before installation, and live operation is strictly prohibited. 2. It is recommended to connect the breaker or circuit breaker in series at the front end of the protection module. 3. During installation, please connect according to the installation diagram, where + is the positive wire, ? is the negative wire, and PE is the ground wire. Do not connect it wrongly. After installation, close the circuit breaker (fuse) switch and check whether the working state is normal. 4. After installation, insert the module