ARrase
1. Surge Protector: This surge protector can protect the DC power system from strike or over voltage.
2. Reliable Working: The nominal discharge current In is 20kA, and the maximum discharge current Imax is 40kA.
3. Safe Protection: Enables 1000V DC maximum continuous working voltage Uc for more stable circuit operating.
4. Good Durability: Made of premium materials, the voltage arrester has high efficiency and long service life.
5. Easy to Install: Very easy to to the circuit, and the simple wiring can be completed in minutes.
Specification:
Item Type: Surge Protective Device
Model: CHLT-40PV
Maximum Continuous Working Voltage Uc: 1000V DC
Nominal Discharge Current In: 20kA (8/20?s)
Maximum Discharge Current Imax: 40kA (8/20?s)
Voltage Protection Up: ?3.2kV
Number of Poles: 2P
Protection : IP20
Working Temperature: -40?~80?, humidity: ?90% (average at 25?).
packing list:
1 x Surge Protective Device
1 x Slip Sheet
Note:
1. The power supply must be cut off before installation, and hot line work is strictly prohibited;
2. When installing, according to the installation diagram, where + is the wire and ? is the negative wire. Do not it wrongly. After installation, close the automatic circuit breaker (fuse) switch and check whether the working state is normal.
1. Surge Protector: This surge protector can protect the DC power system from strike or over voltage.
2. Reliable Working: The nominal discharge current In is 20kA, and the maximum discharge current Imax is 40kA.
3. Safe Protection: Enables 1000V DC maximum continuous working voltage Uc for more stable circuit operating.
4. Good Durability: Made of premium materials, the voltage arrester has high efficiency and long service life.
5. Easy to Install: Very easy to to the circuit, and the simple wiring can be completed in minutes.
Specification:
Item Type: Surge Protective Device
Model: CHLT-40PV
Maximum Continuous Working Voltage Uc: 1000V DC
Nominal Discharge Current In: 20kA (8/20?s)
Maximum Discharge Current Imax: 40kA (8/20?s)
Voltage Protection Up: ?3.2kV
Number of Poles: 2P
Protection : IP20
Working Temperature: -40?~80?, humidity: ?90% (average at 25?).
packing list:
1 x Surge Protective Device
1 x Slip Sheet
Note:
1. The power supply must be cut off before installation, and hot line work is strictly prohibited;
2. When installing, according to the installation diagram, where + is the wire and ? is the negative wire. Do not it wrongly. After installation, close the automatic circuit breaker (fuse) switch and check whether the working state is normal.
