Supplying Demand DA97-01949A Refrigerator Condenser Fan Motor and Blade Kit

This is a fan blade and motor kit only. Does not include housing. This kit will only work if you do not need a new housing or motor gaskets. With huge savings, you can get the same result as purchasing the entire unit. This motor comes complete as all you have to do is unplug the refrigerator. Unscrew all screws on the back bottom plate. Then you just unplug the fan motor and slide the housing out towards you. From there you will need a Philips screwdriver and you can unscrew the motor housing to access the motor. In many cases, the fan blade is hard to get off and may snap into two pieces or more. Therefore we've provided you with a new blade so that you don't have to worry about that issue. Remove the fan blade and the motor (be careful as it can be hot to touch) and then install the new motor and blade the same way. Plug back in and test unit before putting back of panel back on. The fan will not start right away, but after about 10 to 20 seconds after the compressor starts the fan motor should activate and come on. This is not a Whirlpool OEM or Samsung OEM product. The Samsung and Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Samsung and Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. "The trademarks, logos, and service marks (collectively the "Trademarks") displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited."