superobd Fits for Yamaha 3pin + 4pin + 6pin Motorcycle OBD Diagnostic 4pin CANBUS Cable and 3pin for Kline Euro5 OBD2 6 Pin 3 in 1 Plug Adaptor Cable

For yama-ha 3 in 1 obd cable 3pin+4pin+euro5 obdii cable 1. Euro5 OBD2 6 Pin Plug Adaptor Cable Motorcycle Moto Guzzi, Piaggio Vespa, Yama-ha, hon-da, KT-M etc with this cable you can connect your own OBD2 scanner to your motorcycle to read & clear faults, your scanner needs to be able to read ISO 15765/4 (CAN) Protocols 500k 11 BIT. NOTE: This scanner does not work on models with Euro 3, Euro 4 emissions ECU's or K line diagnostic's, it only works on Euro 5 emission ECU's with a RED OBD2 diagnostic connector on your bike. 6 pin Plug Adaptor for use with certain later European motorbikes - Moto Guzzi, Piaggio Vespa etc. This is a new plug type created as a standard (ISO/DIS 19689) This adaptor converts a standard 16 pin OBD2 type plug to a 6 pin plug for plugging into the motorbike diagnostic socket. It covers CAN Bus and K-Line connection. Works on: 2020 KT-M models onwards 2021 Husqvarn-a 701 models onwards 2021 MT09 models onwards 2021 Hon-da's 2. Yama-ha 4 Pin to OBD2 Adapter With this cable along with a CAN-BUS compatible reader, you are able to read and clear fault codes on the following Yamaha bike models: Yama-ha MT10 2016- Yama-ha FZ10 2016- Yama-ha XSR 900 2016- Yama-ha MT09 2016- Yama-ha MT09 Tracer 2016- Yama-ha XSR700 Yama-ha MT07 2016- Yama-ha FJR 1300 2016- Yama-ha R1 2016- Yama-ha R6 2017- Yama-ha XT1200ZE (Super Tenere) 2017- Yama-ha TMAX 530 2016- 3. For Yamaha 3 Pin: Motocicletas compatibles: Yama-ha YZF-R125 Yama-ha MT-125 Yama-ha YS-125 Yama-ha Delight-125 Yama-ha N-MAX 125 Yama-ha X-MAX 125 Yama-ha X-MAX 300 Yama-ha X-MAX 400 Yama-ha AEROX 50 (2018) In the past only yamaha 3+4pin obd cable 2 in 1, now it is 3 in 1