SUNLU Flexible 95A TPU Filament 1.75mm
Recommend Settings
- Nozzle/Extrusion temperature: 195-205?;
- Bed/Platform temperature of 50-60?;
- Printing speed: 20-40mm/s;
- These settings are for 0.4mm nozzle, it may be different with different diameters nozzle.
3 Steps Checking: Why is the Filament Not Sticking to the build bed?
- Temperature Checking - Please check the temperature(bed and nozzle) settings before printing and set it suitable;
- Building Bed Checking - Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed;
- Speed Checking - Please check if the printing speed of the first layer is too fast.
Notes
- Please insert the filament into the side holes after use to avoid tangles;
- Please store the 3D printer filament in a sealed bag or box after using it.
