4-in-1 Submersible Filter Pump JUP-01
How to place it correctly
The filter have been designed to be fully submersible in fresh and salt water. It is easy to install and maintain. The water pump enclosed supply the water to pass through the light cavity whereby the radiation of the light works to clarifty the water.It can be placed anywhere in the aquarium and the pond.
The filter pump could be installed in anywhere of pond or aquarium.
The pump should be beneath the water complete ly which make the water through the lamp sufficiently.
Because of the life of the U-V light TUBE, the light tube should be replaced after 8,000 hours use. When replacing the light tube, the outer shell of the pump should be moved away at first. Then loosening the protective tube of the light. After this, pulling out the glass tube and installing new light tube. In this process, the protective tube should be screwed down tightly for waterproof.
After a period of usage, the sponge will absorb too much dirty to wash away and will influence the current. A new piece of sponge will be needed After moving away the outer shell of the pump, the old sponge cold be found in the internal side of the shell.
The sponge, rotor and outer glass tube should be washed with periodi-city.
A piece of wet cloth is necessary when cleaning.
You may use a great deal of water to swash the sponge.
Features?
Food grade material, harmless to the growth of aquarium
Long life U-V light tube, can work for 8000h
High-tech bio-chem cotton can effectively filter impurities without stinking
CAUTIONS
1. Checking the working of lamp only through the transparent hose below the water inlet nozzle.The dim blue light indicates the light is on.
2. Always turns off the current supply before removing the filter from the water.