Subway Tile Marble Tiles Stickers Peel and Stick Backsplash Stick on Tiles for Backsplash Kitchen 2.0-2.5MM Thicker

Peel and Stick Tile Backsplash? Features Easy DIY, peel and stick on wall. Easy clean and maintenance. Saves your time and money. 3-D Gel-like tiles use PU glue, which has the advantages of long life and no yellowing compared to resin wall stickers. Non-Recommended Surface Oily walls, plaster walls, brick walls, stone walls, Unfinished gypsum wall / plaster wall and walls with rough surfaces, unpainted plywood. ?Surface Requirement ?The tile need to be installed over clean and sleek surface. NOTE: Please measure the coverage area to determine the number of tiles required and consider 2-5% cutting loss. Use a level or chalk line to creat at least one vertical and one horizontal reference lines to guide tile placement. Try not to touch the adhesive surface. Reinforce with pressing roller after installation. The tiles should not be directly contact to flames, steam or immersed in water. Do not install tiles less than 16 Inches from the top of the stove. It is recommended to use tile trim and caulk if contact with water. Against latex/painted walls, The 3M Spray Adhesive is recommended. If you want to remove the tile, you could use a hair dryer to warm up the adhesive and pull softly starting with the corners.Then use a cleaning product to remove the excess glue left by the peel and stick tiles ?100% guaranteed refund, In case it doesn't fit your wall.