Stove Burner Control Knob W10594481 Stainless Steel Cooker Stove Control knob Compatible with Whirlpool Stove and Range and Cooktop- Replaces WPW10594481 AP6023301 PS11756643

How to Work? (Watching YouTube videos can make installation easier) 1. Remove the knob by pulling it straight off its post 2. After using the range, stove or cooktop every time, it is better to clean the front panel. Use wet cloth and mild soapy water or a 50/50 solution of vinegar and water. Rinse with clean water and dry with a soft cloth. W10594481 Burner Knob Fixes the following symptoms: Will not start Will not select setting Will not turn Note: 1: W10594481 Burner Range Control Knob Compatible with Whirlpool WCG97US0DS00, WCG97US6DS00, but not for WCG97US0DS, not suitable for models starting with WEG7. 2: Please confirm the model number and stem length before ordering. The print on the back of your knob may be incorrect. W10594481 Stove Burner Control Knob the length of the stem is approximately 1/2 inch. 3: Please check the direction of the shaft in your Cooktop to avoid buying the wrong knob Our knob is suitable for the D shape shaft whose round edge towards 8 in the cooktop. 4: If your stem is 7/8" inch, then you need W10818230, or 1/8" inch, then you will need W10828837; If your knob has “Off”, “Ignite” and other information on the side of the knob, the model you need is W10766544. 5: Don't use abrasive cleaners, strong liquid cleaners, plastic pads or oven cleaners on manifold panels. They will damage the surface of your range, stove or cooktop. 6: These replacement parts are compatible spare parts (non-original) and the brand names mentioned above and any associated model names are only used to demonstrate compatibility.