SQXBK 10Sets Impulse Sealer Heating Element Service Spare Repair Parts Kit Sealer Replacement Element Grip Impulse Sealer Repair Kits Heat Seal Strips Replacement Elements For Most Hand Sealers

Usage: 1. During the sealing process of the manual heating sealing machine, insert the AC power cord into the socket, adjust the heating time according to the thickness of the sealing material, place the plastic bag on the sealing surface, press the handle, the circuit automatically controls the heating time, the indicator light goes out, about 1.2 seconds, release the handle, and the sealing is completed. 2. If the seal is damaged due to too long heating time, please turn the button to shorten the heating time; The sealing is not firm, because the heating time is too short, please turn the button to extend the heating time. The plastic bag is stuck on the rubber pressing plate, indicating that the cooling time is not enough, and the time after the indicator light goes out. After the heating time is adjusted, no adjustment is required under continuous use. Warm tips: 1. Please keep the sealing surface clean to avoid oxidation caused by residues on the sealing surface and reduce the service life of the heating strip and high-temperature cloth; 2. Do not wipe the sealing surface with wet cloth; 3. If the gasket under the heater blade is damaged, it will cause short circuit and damage the heater blade. Before each replacement, check whether the gasket needs to be replaced. If it is damaged, it needs to be replaced. Specifications: Material: chromium alloy Size: 210x3mm Packaging: sealing machine heating strips x 10