SPEENSUN Automatic Foaming Soap Dispenser,Foaming Soap Dispenser, 450ml USB Charging Touchless Infrared Sensor Foam Soap Dispenser with Hand Washing Cleaning Effervescent Tablets (Blue)

Operating Instruction: 1.Pour 2 pcs hand washing cleaning effervescent tablets or your favorite liquid soap,hand sanitizer or shampoo into foaming soap dispenser and then dilute it with 3-8 times pure water.Before using,pleaseshake the mixture evenly. 2.Press and hold the power button for 2 seconds(the indicator lights red) to turn on the power.When you place your hand nearthe sensor area,automatic soap dispenser will automatically assign. 3.Press the power button once to light the blueindicator light,it is to switch the gear mode;long press for 2 seconds,theindicator light flashes red three times is to shut down. 4.Use the USB cable in the package to chargeit.When charging,the indicator light is red;when the battery is fully charged,theindicator light is blue.After 3-4 hours of full charge,it can be used for about 1 month. Note: 1.It is best to wait for the hand-washing effervescent tablet to completely melt to avoid clogging.The effervescent tablet needs about 20 minutes to completely melt. 2.Before you add liquid soap into the automatic foaming soap dispenser,please make sure the liquid does not contain impurities.Otherwise,it will easily be clogged.If the blockage is serious,it may make the foamingdispenser stop working.When the machine is blogged or after 3 months ofregular use,the dispenser needs to be cleared: Step 1:Clean the filter at the end of the straw with water. Step 2:Empty the bottle and add some water in it. Step 3:Dispense 20-30 times until the water can be dispense smoothly. 3.It might not foam for the first time,because there may be some air in thestraw.Do not worry about it.It will dispense rich foam after several times. Product List: 1.Automatic soap dispenser 2.USB charging cable 3.2 Pcs Hand Washing Cleaning Effervescent Tablets