Circuit Breakers
These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed
location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is
external and long.
High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
Item
DC SURGE PROTECTIVE DEVICE
Code
EASP-PV
Pole
2P
3P
Voltage
500VDC,800VDC, 1000vdc
800VDC,900VDC,1000VDC
In(8/20)us(KA)
20KA
Imax(8/20)us(KA)
40KA
Standard
IEC/EN61643
Type
II
Characteristic Curve
B,C,D
Working Temperature
"-5°"to +40°
Protection Degree
IP20
Electrical life
More than 8000times
Mechanical life
More than 2000times
Dimension(W)X(H)X(D)
36x90x68
54x90x68
Installation
35MM DIN RAIL
Accessory
Remote signal
Installation Altitude
2000M
These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed
location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is
external and long.
High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
Item
DC SURGE PROTECTIVE DEVICE
Code
EASP-PV
Pole
2P
3P
Voltage
500VDC,800VDC, 1000vdc
800VDC,900VDC,1000VDC
In(8/20)us(KA)
20KA
Imax(8/20)us(KA)
40KA
Standard
IEC/EN61643
Type
II
Characteristic Curve
B,C,D
Working Temperature
"-5°"to +40°
Protection Degree
IP20
Electrical life
More than 8000times
Mechanical life
More than 2000times
Dimension(W)X(H)X(D)
36x90x68
54x90x68
Installation
35MM DIN RAIL
Accessory
Remote signal
Installation Altitude
2000M
