Sourcingpower RC Battery Charger for 3.6V,4.8V,6V,7.2V,8.4V,9.6V NiMH/NiCd Battery Packs Hobbies Airsoft Batteries,RC Car,Truck,Airplanes,Air Gun,with Tamiya,Hitec,RX,JST,T Plug

Make sure this is what you want. Not applicable: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium Advantage Auto-stop battery charger.After fully charged, the power is automatically cut off to ensure the safety of charging meanwhile protect the battery life; Trickle chargeIn a fully charged state, after automatic power off, the charger will maintain a trickle charge state to ensure that the battery is always fully charged when the battery has not been removed for a long time. Easy operation Red light = charging          Green light = charged RC Battery Charger for NiMH/NiCd Battery Packs?3.6v, 4.8v, 6v, 7.2v, 8.4v, 9.6v) Connect the charger to mains(110V-240V AC~ 50/60Hz); The LED light will flash briefly to indicate that it is ready; Please check the polarity before connecting the batteries; Connect the RC battery (NiMH or NiCd), the LED light will light up red during the charging process; When done charging, the LED light will switch to green; Until the battery is disconnected the charger will keep the battery completely charged. Technical Data: Input Voltage: 110-240V—50-60Hz. Power Comsumption: Approx. 12W. Charge Rate: Max 1000mA. Charge Indication: red/ green LED light. Operating Temperature: -10?/14? to 40?/104?. Dimensions: Approx. 80 x 50 x 67 ex. Cable Only one connector can be used at a time when in use, please do not use two heads to charge at the same time