Solar Mole Repeller Gopher Repellent Ultrasonic Solar Powered 2pcs Pest Repeller for Mole Repeller Rodent Gopher Deterrent Vole Chaser for Lawn Yard & Garden of Outdoor Use 4 Packs

Was: $109.70
Now: $54.85
(No reviews yet) Write a Review
SKU:
ZDF398786
Condition:
New
Availability:
Free Shipping from the USA. Estimated 2-4 days delivery.
Adding to cart… The item has been added
EFFECTIVELY AND WIDE COVERAGE Our solar powered ultrasonic mole repeller pulses emitted 2 seconds of low frequency pulses every 30 seconds, which penetrate through the soil and deters them from entering the protected area as moles are sensitive to sound and vibrations. The coverage is up to 5,000sq ft. STURDY & WATERPROOF The solar powered mole repeller can be used outside such as lawn with a waterproof level of IP65 and its anti-corrosive material. It can be washed by water or rain directly. You can insert the spike until the cap is flush with the ground. But if there is water on the ground, please ensure this unit is at least 2 inches above the ground to prevent submerging. SOLAR POWERED Our solar mole repeller has a solar cell in the top part. It charges the built-in rechargeable battery to ensure durable operations day and night. An installation location that can be exposed directly to the sun's rays has to be selected for optimum using effect. 4 Hours charging Lasts for 5 Days. Please keep the solar panel clean cause a dirty panel will reduce the available sunlight for the battery charging. SAFE & ECO-ENVIRONMENT This solar powered mole repeller is EPA certified. No chemicals or poisons are used to attract and kill animals. The repeller is friendly to people and living environment. New technology of this repeller has brought higher efficiency, especially no harm to people and pets. This product is suitable for open spaces such as open grasslands and parks. COMPACT & EASY TO SET Our solar mole repeller weighs only 0.2Lbs every single one. For five ones, they only weigh 1Lbs. It is convenient to take them to set wherever you like. Also, the set-up steps are easy: 1. You need to dig out a pilot hole. 2. Insert the spike into the hole. 3. Press the ON/OFF button, and it will start to work.