SMKJ Flashing LED Light Car Gear Shift Knob Shifter Lever Gear Stick for Most Manual or Automatic-Blue-

Description: Material: Aluminium Alloy Product Color: Silver Size (L x W): Approx. 6.5 x 5.5 cm Diameter: Approx. 1.5 cm With 3 adapters (8mm,10mm,12mm) for easy fitment No modification required, directly upgrade your original knob Applicable to most types of Auto car vehicle Truck SUV for Automatic Transmission which is without button. Manual Transmission no need to lift up the shift while backing out Install 1, Remove the original car gear shift knob 2, Take the adapters suitable size For shift knob 3, Put The gear head into the shift knob 4, The gear head directly set into the shift knob rod Steps to replace the battery: 1. Rotate the metal cover counterclockwise. After unscrewing, you can see 6 LED circuit boards. The top of the circuit board is the switch button and the small spring. 2. Locate the two snaps on the board and pull one of the cards. Then raise the board up and clearly see a button cell underneath the board; 3. Remove the button battery under the circuit board and replace it with a new one; 4. Press the board back to its original position and the card is aligned with the hole and snapped. Tighten the metal cover clockwise. Note: 1, Make sure the original shift knob can be put away. 2, Please read all description & size before ordering the product. 3, This item is not suitable for Buick, Excelle, Cruze,Hyundai Accent and other cars with the same gear way! 4, Many Other Types Of Shift Knobs Are Available In Our Store, Welcome for Your Purchase! Package content: 1 x gear shift knob 3 x install adapters(8mm,10mm,12mm) 1 x Wrench Set of Screws 1 x Battery