Smarttech Home Utility Hooks,3 Traceless Self-adhesive Wall Hooks,Washable & Reusable Hanger (3 Hooks, Transparent)

How to use: 1.Clean the surface from oil/dust/water.Do keep dry before put the hook on. 2.Peel off the cover starting from the bulge. 3.Press the basic of the hook to contact steady from middle to edge.Make sure the basic of the hook contact with the wall totally. 4.Exhaust air by your hand.Suggest 6 hours after use,the effect is better. Where to use: Board / Glass / Frosted Glass / Glass Grid / Ceramic / Metal Surface / Non-paint walls / Other hard flat surface. How to remove:Use the hair dryer heating it, then press and hold the prominent position of the basic to remove the hook slowly. No Traces will left.Maximun load:15kg The sticker of the hook is made of colloid which can fill little gap junctions. Also the sticking area is larger than the base frame of the hook. Good flexibility makes it stick to surfaces strongly and stably and can take weight up to15kg.Wide application Waterproof and oilproof with temperature resistance No matter if the surface is wetted or poured with oil, or if it is in hot summer or in cold winter, the sticker of our hook won't be distorted as many other plastic sticker does and will stay strongly and stably as the same.Notice 1.Normally on the smooth tile surface, this hook can hold up to 15kg. But we'd like to suggest no more than 5kg for hoilding a long time by each hook. 2.Please clean the adhesive surface with water and dry it with hair dryer if it has dust covered before reposition the hook.3.Please do not hang valuable and fragile items.