Smart Plug, DoHome Wifi Outlet Compatible with Alexa,Google Assistant&Apple HomeKit (No Apple MFi),Timer, No Hub Required, FCC,CP65,Only Support 2.4GHz WiFi Network,15A Smart Socket (2 Pack)

FAQ: Q: How to quickly switch the HomeKit and DoHome distribution modes of smart plugs? A:Long press for about 5 seconds, the led will slow blink (once per second), after 5 seconds the hotspot named Homekit_XXX will appear, so you add the plug in Home APP. Long press for about 5 seconds, the led will fast blink (twice per second), after 5 seconds, the hotpot named DoHome_XXX will appear, so you can add the plug in DoHome APP. Q: How to reset the plug to the default factory mode? A: Long press the button of the smart plug over 5s and the indicator light will blink slowly. Q: During the network configuration, is there something you should pay attention ? A: 1.Please make sure that the device, your phone and the router are close each other during the network configuration. 2.Please ensure that you key the correct password of the router. 3.During the configuration of network, please keep that the router works in the 2.4G frequency band, enables the broadcasting function and works in the non-"11n only mode". 4.During the configuration of network, please ensure that wireless encryption mode of the router is wpa2-psk and the type of authorization is AES. Or both are set to the automatic mode. 5.During the network configuration, if the router opens the wireless MAC address filter, please move the device away from the MAC filter list of the router. Please confirm whether the router has the firewall function. If this function exists, please turn off the firewall function and then try to connect the device to the router. 6.If it is a dual-frequency router, please set different passwords for 2.4G signal and 5G signal or turn off 5G signal. Please remember not opening the function of dual-frequency combination.