Smart Multiple DC 12V 24V 36V 10A 433MHz 4 Channels 4 Channel Wireless Relay RF Remote Control Switch Receiver Relay Remote Control Switch + Thumbs Transmitter

Package Include 1* Receiver (with cover) 1* Remote Control (with battery, If you need extra remote control, please tell us. ) 1.Working Voltage: DC12V-36V 2.Current:Standby less than 10mA,Working less than 128mA 3.Working Temperature: -10'C—+60'C 4.Receiver Frequency: 433.92MHZ 5.Receiving Sensitivity: -105dB 6.Output State: Switching Value 7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A 8.Case Size:96* 80 * 29mm Encoding Type: Learning Code Add transmitter by the Learning Button on the receiver explanation working modes Momentary: Press the transmitter button A,the receiver relay A is ON; Release button A ,The receiver relay A is OFF ,The same as B/C/D Toggle: Press the transmitter button A For 1 time ,the receiver relay A is ON; Press button A again,The receiver relay A is OFF ,The same as B/C/D Latched:Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFF.... Press transmitter button D,the receiver relay D is ON,the relay A/B/C is OFF set working mode:Working way changed by Learning button Momentary: Press the Learning Button 1 times. Relay: Press and hold -> On; Release -> Off. Toggle: Press the Learning Button 2times. Relay: Press -> On; Press same button again -> Off· Latched:Press the Learning Button 3 times. Relay: Press -> On; Press other button -> Off. 2channel Momentary+2channel Latched: Press the Learning Button 4 times. 2channel Momentary+2channel Toggle: Press the Learning Button 5 times. 2channel Toggle+2channel Latched: Press the Learning Button 6 times. About Learning and clearing Method: Learning: Press learning button, the indicator flashes and OFF, loosen finger, press any button of the remote transmitter, indicator flashes three times, meaning learning succeeds.(how many times press the learning button according to the working way you need) Clearning: Hold press learning button about 8 seconds,indicator light flashes several times and off,then press remote ,Relay did not Respond ,it means clearning code successful.