Small Size Universal Ceiling Fan Remote Control Kit?Wireless Remote Control and Receiver Kits for Ceiling Fan Lamp?Light and Timing

NOTICES:1.The receiver is plane up, can not be installed upside down so as not to affect the cover is uneven with the ceiling. 2. The inputs and outputs of the receiver can not be connected reverse.3.Check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size.4. If you have PULL CHAINS SWITCH, before install the wireless remote control kit, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together. And you can get max speed when press "high" fan button.5. The receiver does not have the function of Reverse.6. Please press every button on remoter to check if any response from receiver. The receiver buzzer should be sound when you press any button. If no sounds feedback, please contact seller for technical support.7. When remote fails to operate. please check?a.Is there power to the control unit?b.Is the control unit wired correctly?c.Is there a good battery in the remote?d.Whether there are other remote controller products nearby and working?Because remote controlled products with the same frequency will disturb each other while working in close range.8. Supporting 500W light and 145W fan. PS: Please connect the ground wire correctly otherwise it may cause the light micro-light or flash. 9. Battery not include (2x AAA battery).10.I have 2 ceiling fans in adjacent rooms. If I buy 2 of these remote controls, will they interfere with each other?No, each remote and receiver kit had been paired before delivery, It means that 1 remote can only control 1 ceiling fan in default setting, it works individually.Not require selecting pin codes in multi-fans application thanks for the advanced RF technology.