Slide Door Roller Assembly for for Honda Odyssey EX, EX-L, Touring model Rear Passenger Right Side Replaces 72521-SHJ-A21, 924-129, 72521SHJA21

REPLACES PART#72561-SHJ-A21, 924-128, 72561SHJA21, Dorman 924128, 035239, 72561S-HJA21 commonly found on popular Honda Odyssey EX, EX-L, and touring submodels. Required Tools: Plyers (needlenose is best) Metric sockets or wrench. Philips screwdriver. Jack or other support for door. IMPORTANT: Do not let the back end of the door dip too far or else you will derail the front of the door. If this happens, you will need help to put it back on! 1. Open lift gate and remove light. 2. Lower Slider window (keeps door from sliding all the way back) 3. Turn off door! 4. Remove the long screw and bolt holding slider cover in place. 5. Insert cardboard under roller assembly 6. Place STURDY support under door. (Best to have door on piece of wood to prevent scratching) 7. Mark where mount meets door with sharpie (to line back up) 8. Remove two bolts securing mount. 9. Tilt mount up and then pull out of track. 10. Disconnect Cable. 11. Remove C-clip and pin holding assembly to mount. 12. Reassemble with new mount. Repeat above in reverse order, but be REALLY careful on putting mount back on door!!!