SL-126 Seco-Larm 6-12VDC Informative Red Strobe

ONLY 2-WIRE CONNECTION FOR 6-12 VOLTS * CE approved products are identified with the CE mark on the product. · For "informative" general signaling requirements · Incorrect polarity cannot damage circuit or draw current · Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function · Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes) · Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic · The SECO-LARM SL-126 strobe lights come with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has been removed · Use in temperature ranging from -22ºF (-30ºC) to 140ºF (60ºC) · For 6- to 12-Volt use CircuitsAll solid-state Input ConnectionsRed/Positive Black/Ground Leads#18 Gauge, 12" Long Electrical ProtectionReverse polarity protected Illumination100,000 Candlepower Operating LifeOver 2,000,000 flashes (300 hours continuous) Input voltage6~12 VDC Operating Temperature-22º~140º F (-30º~60º C) BaseHigh-impact black ABS input current120mA±20%@6VDC 200mA±20%@12VDC Flash RateOver 60 per minute at 6 VDC. Over 90 per minute at 12 VDC LensHigh-impact resistant acrylic