SJZBIN 6PCS WS2812 LEDs Light Strip Driver Board LEDs Light Strip Driver Board 8 Channel Built-in Full Color-Driven Development Board 8-Bit Light Strip Driver Board for Arduino

Product name: WS2812 5050 RGB 8 LED light belt driver board. Product port: number. Product model: LED L1 V2. Product chip: WS2811. (Built in LED) Product LED: 5050 package RGB full-color highlight x 8. Product value: the voltage of the product is 5V; The power is 0.7W. Product size: the overall size of the product is 62mm/2.44'' x 12mm/0.47''. Product package: 6pcs WS2812 5050 RGB 8 LED light strip drive boards. Product features: 1.5050 high brightness LED, built-in control chip, only one IO port can control multiple LEDs. 2. The chip has a built-in shaping circuit, so the signal distortion will not accumulate, and the display is stable. 3. Three primary colors 256 level brightness adjustment, 160,000 color true color display effect, scanning frequency not less than 400Hz/S. 4. The serial connection interface can complete the data reception and decoding through a signal line. 5. When the refresh rate is 30 frames/second, the number of levels in low speed cascade mode shall not be less than 512. 6. The data receiving and transmitting speed can reach 800Kbps at most. 7. High brightness LED, high consistency of light color brightness. 8. There are connection interfaces at both ends, which can be directly plugged. Application: This product can be widely used in full-color modules, full-color soft light LED decorative lights, indoor and outdoor LED video special-shaped screens, etc. NOTICE: 1. Due to different display and lighting effects, the actual color may be slightly different from the image. 2. Please allow the deviation of length due to manual measurement.