Sized Family Lounge Pool - Children's Inflatable Pool - Inflatable Swimming Pool for Family Swimming Pool Above Ground for Baby- Kids- Adults- Outdoor- Garden- Backyard

Sizes(about): 110 * 88 * 33cm/43.31*34.65*12.99in 128 * 85 * 45cm/50.39*33.46*17.72in 155 * 108 * 46cm/61.02*42.52*18.11in 181 * 141 * 46cm/71.26*51.51*18.11in Material: High-strength hot carbon tough PVC layered independent airbag Instructions for use: After unpacking, unfold it completely and lay it flat on a clean and smooth ground. From the bottom to the top, inflate layer by layer, inflate to 90% -95% saturation, and then press down to parallel to the body of the pool. After inflating for 8 hours, there is no air leakage, and then add cold water. Add hot water (after mixing with water). The temperature must not be higher than 50% C). After use, open the bottom drain plug. After the water is drained, place the swimming pool in the shade and dry it. Then open the vent valve, completely deflate and put it in a PE bag and place it in the shade. Packing List: Swimming Pool * 1 note: Please be careful not to use a knife or other sharp tools when unpacking. Do not inflate too much, because it is a plastic material, the principle of thermal expansion and contraction of rubber, inflatable products have their own "God extendibility, due to the size system ? The difference between the inflation saturation and the measurement method. When you first receive the goods, the size will be small, there may be an error of about 5-10 cm, and it will return to normal after you charge more times. The size measurement is: to measure from the position of the inflation nozzle