SimPure RO Membrane, 75GPD Reverse Osmosis Membrane, 1.8"x12" Water Filter Replacement for Under Sink Home Drinking RO Water Purifier System

Simpure adopt advanced filtration technology to provide you with safe and reliable drinking water Specifications: Filter Size: 1.8"x12" (Fits Standard 2" ID Membrane Housings) Material: Polyamide Thin-Film Composite RO Membrane Filter rating: 0.0001 micron Capacity: 75 Gallon Per Day Stable rejection rate: 97% Testing pressure: 60 psi Appliance water: municipal water supply Lifetime: 2~3 years(depending on your water quality) Operation Limits and Condition: Max Feed water Temperature: 45°C (113°F) Max Working Pressure: 300psi Max Feed water Permeated Flow: 7.6LPM (2.0GPM) pH Range of Feed water during Operation: 3~10 Max Feed water SDI15: 5 Residual Chlorine Concentration of Feed water: ?0.1ppm Installation Steps: Step 1: Remove the tube from the fitting and twist off the housing cap with wrench Step 2: Pull out the old RO membrane Step 3: Put the new RO membrane into the housing Note: Water produced in the first 20 minutes of the new RO membrane needs to be drained before drinking water. Note: 1. If you have chlorinated water, we recommend you use a Carbon and Sediment Pre-Filter before RO element. The residual chlorine in municipal water will destroy the Thin Film Composite membrane. 2. Discard the RO-filtered water produced during the first 30-60 min after system star-up.