Silicone Resin Tray Molds, Large Geode Agate Serving Tray Molds with 2 Pcs Irregular Resin Platter Molds and 2 Pcs Handles Molds, Epoxy Resin Casting Molds for Making Faux Agate Tray, Serving Board

Silicone Tray Molds for Resin Large Serving Tray Molds for Resin Casting Epoxy Resin Geode Agate Tray Molds Irregular Resin Platter Molds Epoxy Resin Casting Molds for Making Faux Agate Tray Cabinet Cupboard Handle Molds [Packaged included:] 2 x Silicone resin tray mold (13.6 × 8.3 inches, 12 × 6.7 inches) 2 x Handles molds( 6.3 inches, 7.9 inches) [How to Reduce Bubbles?] NOTE: Torch is not recommended to use as it may tear the molds. There're several methods to reduce the bubbles in the resin. 1. Warm your resin before using it. 2. Mix the resin and hardener slowly and deliberately. 3. After you've completed mixing the resin and hardener together, let it sit about 5 minutes. [How to Demold:] Usually, most of the resin pieces could pop out from the mold easily. There're also 2 methods to make this process easier. 1. Use mold release to keep the resin from sticking to molds, and it is great for prolonging the life of molds as well. 2.After your resin pieces are completely cured, pour some soapy water into the mold.