Silicone Planter Mold Concrete Molds for Flower Pot Making DIY Handcraft (SquarePlusRound)

Steps about flower pot making by using our mold: 1.Prepare cement and fine sand as materials, with a weight ratio of 1:1 to 1:3. Add water to turn cement and fine sand into a paste(The ratio of cement to water is about 2:1 to 2:1.5) 2.Pour the mortar into the mold and knock the shell of the mold to expel the bubbles in the mortar. 3.Insert the attached glue stick into the appropriate position to make drainage hole. 4.Place the mold in a cool place for about 24 hours to ensure that the mortar in the mold has become dry. 5.Pull out the glue stick 6.Turn the mold over and take out the flower pot. 7.Frosted the bottom of flower pot to make sure it is flat. 8.In order to ensure that the flowerpot will not crack in the future, we recommend placing it in the water for about 7 days before using it. Tips: wipe the inside with baby oil/release agent can help to demold much more easily. Note: Pot mold NOT for RESIN, resin will be cloudy haze finish.