Shurtape HP-800 Heavy-Duty Grade Packaging Tape 2 in. x 55 yds. Clear

Shurtape HP-800 Heavy-Duty Grade Packaging Tape is an extremely tough packaging tape used for heavy-duty bottom carton seals. Ideal for packing military supplies, high-value electronic components and sealing hazardous materials and chemicals. This is a 3.4 mil thick tape that is constructed from polyester film, not biaxially-oriented polypropylene (BOPP) film like most carton sealing tapes. HP 800 is one of the strongest, thickest packaging tape available. it has excellent high tack adhesion to corrugate and high abrasion resistance. The polyester tear-resistant film lasts the life of the box.

If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 50m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information- Core: 3 inch diameter - Backing/Carrier: 50 micron polyester film - Adhesive: hot melt rubber - Thickness: 3.4 mils (carrier, adhesive) 2 mils (carrier) - Adhesion: 95 ounces per inch (to stainless steel test panel) - Tensile Strength: 54 pounds per inch (longitudinal) - Application Temperature: 35F to 110F - Service/Operating Temperature: -20F to 150F - Elongation: 130 % - Holding Power to Fiberboard: 35,000+ minutes