Shurtape HP-232/CLR2110 HP-232 Cold Temperature Performance Packaging Tape 2 x 110 yd Clear

Shurtape HP-232 Cold Temperature Performance Packaging Tape is specifically engineered for cold temperature case sealing performance. Recommended for automated and manual packaging applications in cold temperature environments including produce packaging, meat, and poultry processing, dairy facilities, cold weather moving & storage and unheated warehouses in cold weather climates. Shurtape HP 232 has an aggressive high tack adhesive which produces a better initial bond and continuous holding power. The tape can be applied in temperatures as low as 20F and can operate in temperatures as low as -20F. Made in the U.S.

If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 100m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information- Core: 3 inch diameter - Backing/Carrier: 30 micron biaxially oriented polypropylene (BOPP) film - Adhesive: synthetic rubber-resin hot melt - Thickness: 1.9 mils (carrier, adhesive) 0.72 mils (adhesive) 1.18 mils (carrier) - Adhesion: 30 ounces per inch (to stainless steel test panel) - Tensile Strength: 27 pounds per inch (longitudinal) 44 pounds per inch (transverse) - Application Temperature: 20F to 75F - Service/Operating Temperature: -20F to 100F - Elongation: 150 % - Holding Power to Fiberboard: 10,000+ minutes