Shock Mount Upper Rear Compatible with Chevy GMC 19992007 Sierra Silverado with Round Tube Xmembers excludes CK series and 07 new body

Rear Axle Upper shock mount custom Compatible with Chevy/GMC 1999-2007 Silverado / Sierra 1500 ½ ton trucks that have a round tubular frame stiffening crossmember. Quantity Included - One (1) shock mount bracket. Our shock mount is made from 11 gauge mild steel, it was custom designed specifically for these pickups. This piece is laser cut, precision drilled and custom perforated. Our pre-fabricated shock mount is then coated with light machine oil, and placed in a labeled bag. This equals no part mix ups. We produce our parts in small 200-300 piece lots, this allows us to run random quality checks in each lot against a control piece and adjust any machines or tooling to spec required. Finding a quality, truly custom fit replacement for the Original Manufacture shock mount is difficult to say the least, This generally cannot be found at a dealership parts dealer. Generally trucks are needing these replaced due to rust and / or fatigue causing one side of mount to crack from stress. It has been determined that by shortening up the distance from the crossmember weld to the bolt hole, the mount becomes more rigid since there is less metal to flex and fatigue. All tolerances and clearances have been checked for this design and there is still complete articulation of the shock, even at full suspension compression and full droop. Our replacement shock mount SHIPS FLAT and is easily bent at the perforation lines in a vice or on shop bench. It will naturally bend in the proper spot.