Shinekoo Molds for Resin Casting Rectangle Doorplate Epoxy Crystal Molds DIY Tablet Pendant Door Hanging Welcome Sign Plates Restaurant Door Sign Making Model

How to use? How to make a resin coaster: 1. Pour the resin into a measuring cup and stir slowly to release air bubbles. If necessary, you can add glitter or paint on it. 2. Pour into the Molds and stir slowly. Can stand for 24 hours and take out. How to clean and store the silicone Molds: 1. After cleaning with warm water, soap, rubbing alcohol, etc., wipe with a soft cloth. Clean the Molds after each use to maintain gloss and extend the life of the Molds. 2. Store the resin silicone Molds in a place protected from direct sunlight and dust. Tips: 1. We only provide silicone Molds. Please make your own! 2. After squeezing and deforming, you only need to rest for a while, and then restore the state. 3. After use, please wash with water, then dry, store it flat, and store in a cool place. 4. Please avoid heating and sharp tools. Silicone Molds only,other accessories demo in the picture is not included. Warm Tips: 1. We only provide Moldss. Please DIY! 2. After squeezing and deforming the silicone Molds, just rest for a while to restore the original. 3. After use, please wash with water, then dry it and put it in a cool place. Silicone Molds only,other accessories demo in the picture is not included.