Screen Replacement for iPhone 6 White 4.7inch, MAFIX LCD Touch Digitizer Full Assembly with Front Camera, Proximity Sensor, Ear-Speaker, Fit Model A1549, A1586, A1589

Compatible with : iPhone 6 4.7" all carriers (A1586/A1549/A1589) - The new front screen replacement total four flex cables, other components were pre-assembled. - You only need to remove the home button from original screen to the new one to retain the touch ID/Fingerprint identification function. - Please test all items before installation for the screen is easily broken,so carefulness is an indispensable part while installing. - To provide customers the best service, our products provide 30-day money back guarantee and 6-month manufactured warranty. Your packing include: 1 x iPhone 6 screen replacement 1 x 9H Screen Protector 1 x Repair tools Please pay attention before the installation: 1.) The screen belongs to fragile items and the flex cables are very flimsy. Please check the LCD to make sure the flex cable is in good condition and there is no debris on the connector. 2.) The ribbon cable of the home button is connected to the screen. When disassembling your iPhone, please open up the screen a little and disassemble thebutton cable firstly then get the screen out. 3.) Mark down all the screws you remove while disassembled the screen, incorrect placement of these screws during reassembly Will cause permanent damage to your iPhone's logic board. 4.) Watch through YouTube installation video tutorial before getting started. When reassembling your phone,please power off, and flex cable should connect one by one to the phone motherboard dock well. 5.) If the phone is deformed, it is easy to get stuck when installing, please do not press down directly, it's easy to burst the screen, you should press it downward by flat pushing. 6.) The display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone.