Screen Replacement Compatible with iPhone 6S Black 4.7" LCD Display Touch Digitizer Screen Assembly Set with Free Repair Tools (iPhone 6S, Black)

Product Name: Screen Replacement for iPhone 6S Color: Black Compatibility: iPhone 6S black (4.7 inch) ONLY, NOT for iPhone 6 or iPhone 6 plus Note: The home button, earpiece speaker, front camera, sensor flex and LCD shield plate are not included in the iPhone 6S screen replacement. Please transfer them from your original screen to the new one. Application: Used for replace the screens that are cracked, broken, dead pixel, damaged, touch is not working, touch response issues, non-functioned screen. Installation Instruction: 1. Please watch the video before installation. The video link of iPhone 6S screen replacement is https://www.youtube.com/watch?v=Nm61HUW4Bmw 2. Disconnect the battery cable or power off the phone before installation. This will protect your phone from damage if the improper operation done. 3. Each screw should be installed into the original location. These screws have different length and size, if put into the wrong location, the screen may be damaged. Do not over tighten the screws. 4. The flexible cable is very fragile, please remove it carefully when replacing the screen and parts. During installation, please do not press the upper corner at the same time, otherwise it will damage the LCD screen. If your phone has some problems after installing, like cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps: 1. Reinstall all flex cables and check all flex cable is in good condition. 2. Restart the phone: Reset the phone by holding both Power and Home button together pressed for min 15 sec, after few minues, turn it on, or reconnect the battery. If still have any questions, please feel free to contact us. We will try our best to help you. Enjoy your shopping.