Scan Tool Barcode Scanner, Imillet Handheld USB Wired Barcode Reader, ID 2D and QR Code Scanner Reader

Specifications: Material: ABS+PC+TPU Size: 170mm*97mm*68mm Light source: White LED Sighting Device: Red LED, 617nm Interface: USB Scanning Angle: angel of pitch ±70°, angle of inclination ±60°, rotation ±180°. Discernible printing contrast: Minimum 30% contrast Decoding Capability: All standard 1D and 2D bar codes Input Voltage: 4-5.5V DC Operating power:2;400mA @ 5v-Typical value Standby Power: 0.45W; 90mA @ 5v-Typical value LED Safety Certificate: IEC62471 CB:IEC60950 Operating Temperature:0oC -40oC Storage Temperature:-40oC -60oC Humidity:5%-95% relative humidity(non-condensing) Light level:0-100,000LUX Shock Resistance: Designed o withstand 1.5 meters drop on concrete surface Dust Proof: Seal to prevent air dust IP level:Ip54 Bar Code Density: Depth of field 5 mil Code39:33-95mm(1.3-3.7 in.) 13 mil UPC-A:32 - 255 mm (1.3 - 10.0 in.) 20 mil Code 39:35 - 355 mm (1.4 - 14.0 in.) 6.7 mil PDF417:30 - 95 mm (1.2 - 3.7 in.) 10mil Data Matrix:30 - 100 mm (1.2 - 3.9 in.) 15mil Data Matrix:21 -162 mm (0.8 -6.4 in.) 20mil QR:23 -200 mm (0.9 -7.9 in.) Resolution:4 mil Tolerance: 100mm/sec 13 mil UPC Notes ?To secure a good reading effect, the beam given out by the barcode scanner should be aimed at the center of the barcode. ?The closer the scanner to the barcode, the smaller the scanning area and vice versa. If the barcode is small, the scanner should be closer to the barcode; if the barcode is relatively large, the scanner should be a little bit far away from the barcode. ?If the barcode has a comparatively high reflexivity, you may have to scan the code from a specific angle so as to scan the code successfully.