SBPF205-16 Pressed Steel Housing Bearing Unit 3-Bolt Flanges Mounted

The SBPF205-16 flange mounted bearing has a pressed steel flange housing, three bolt holes, a 1" inside diameter, and steel bearings. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires three 5/16" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.