SANKA LCD Digitizer Screen Replacement Display Retina 3D Touch Screen Glass Frame Assembly for iPhone 6S Plus, 5.5" - Black (Free Repair Tools Included)

The Black Screen Replacement Repair Kit Only for iPhone 6S Plus (5.5") Model: A1634/ A1687/ A1699. Please confirm your phone model before purchasing. Installation Tips: (1)Power off the device before starting. (2)Use the correct screwdriver to open the screws. (3)Need to remark the screws and keep in mind its' original position. (NOTE: Incorrect screws will damage your phone.) (4)Remember to disassembly the battery connector when doing further steps. (5)Do not forget to test the LCD. (6)Be careful to disassembly the home button, it is easy broken. (7)Avoid to pull the flex cable too hard. (8)Do not press the upper 2 corners of the LCD, it is easy damage. Q&A Q: If I installed the screen replacement as you said, but black screen/ can't touch/ have stripes, what should I do? A: Could you check and operate as following steps? a.Please power off your phone, then separate the screen and the other part. b.Please check the flex cables are in good condition and there are no debris on the connector. Then press tight on the ribbon cables to make sure they are connected well. c.Restart your phone. NOTE: the screen belongs to fragile items, so please be careful when you install it in case it break. If still not work, please feel free to CONTACT US. Package List: -1 * iPhone 6S Plus, 5.5 inches Black Screen Replacement Assembly -1 * 5 Point star pentalobe screwdriver -1 * Philips screwdriver -1* Suction Cup -1*English Manual NOTICE: Home button and camera are not included. Friendly Suggestions: There are kinds of Youtube Videos, telling how to replace screens, videos are much better than instructions. Be confidence, it is a quite easy job, just be patient. You can do it.