SANKA LCD Digitizer Screen Replacement Display Retina 3D Touch Screen Glass Frame Assembly for iPhone 6S, 4.7" - White (Free Tools Included)

The White Screen Replacement Repair Kit Only for iPhone 6S (4.7") Model fit for A1633 / A1688 / A1700. WARRANTY: 2 YEARS WARRANTY. Notes: (1)Power off the device before starting. (2)Use the correct screwdriver to open the screws. (3)Need to remark the screws and keep in mind its' original position. (4)Remember to disassembly the battery connector when doing further steps. (5)Do not forget to test the LCD. (6)Be careful to disassembly the home button, it is easy broken. (7)Avoid to pull the flex cable too hard. (8)Do not press the upper 2 corners of the LCD, it is easy damage. Friendly Suggestions: There are kinds of Youtube Videos, telling how to replace screens. Videos are much better than Instructions. Be confidence, you can do it.💪 Q&A Q: If I install it as steps, but show turn off ,no touch, no home button function, flashing, lines on the screen. What should I do? A: Don't worry about it. Firstly, Please try reinstall all flexible cables on the motherboard. Secondly, check that all flexible cables are intact. Then restart the phone. NOTE: If you have any product problems or comments, please feel free to CONTACT US. SANKA customer service will be always here to help you. Package List: -1 * iPhone 6S, 4.7 inches Screen Replacement Assembly -1 * 5 Point star pentalobe screwdriver -1 * Philips screwdriver -1* Suction Cup -1*English Manual NOTICE: Home button and camera are not included.