SaiDian 10Pcs Flash Circuit DIY Kit Simple Electronic Suite Electronic Production

Principle of Operating: For YSG-1, the Q1 and Q2 form the multivibrator which used to control the flashing of these two LEDs. And here is the operating principle of multivibrator. As there is difference between the components, Q1 or Q2 will be turn on at the first place after the boot. If Q1 turns on at the first place, the voltage of Q1 collector will be 0V and the D1 starts light. As it cannot have a sudden change on the voltage of two ends of the capacitance, the Q1 collector with 0V will let the base potential of Q2 reduced to 0V through C1 and let the Q2 turn off. D2 turns off at this time. When the charge voltage of C1 increases to the breakover voltage of Q2, the Q2 turns on. And the voltage of Q2 collector reduced to 0V and D2 starts to light. In the same way, the Q2 collector with 0V will let the base potential of Q1 reduced to 0V through C2 and let the Q1 turn off. D1 turns off at this time. The multivibrator will operate according to this cycle to let two LEDs light by turns. And the flashing frequency of these two LEDs depends on the specification of C1C2R2 and R3. Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness. We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package included:10Pcs