S3213 Fuel Water Separator Marine Kit, 10 Micron Filter Effect is Suitable for 3/8 Inch Npt Outboard Motor Mercury 35-60494-1, 18-7932-1, 18-17928, 35-809097

Replacement part number: Replaces Mercury 35-60494-1,35-809097 Replaces Racor S3213, B32013 Replaces Sierra 18-7932-1,18-7932,18-7928-1,18-7928,18-7919,18-7919-1 Replaces Mercury Marine 35-809097,Racor S3213,Yamaha MAR-24563-03-00,Sierra 18-7919,18-7919-1 Please check the part number before ordering, thank you! Installation Notes: 1. The fuel filter is connected in series on the pipeline between the fuel pump and the inlet of the throttle body. 2. There are 4 ports, two inputs and two outputs. We have provided two plugs and two plugs, which must be plugged with Teflon tape before use, and then installed on the filter and tightened to prevent port leakage. 3. When installing the water separator and filter, put down the nylon collection bowl. 4. Please use tools to tighten the filter when installing the filter, and add oil to the filter before installation. 5. After installation, please start the engine and check to make sure there is no leakage. Precautions: 1. This a separator for Diesel & Water, It could not be for Petrol & Water separator. 2. The input port and output port can be on the same side or on the other side to meet your various needs. 3. The outlet at the bottom allows you to discharge excess dirt and water without disassembling the components. 4. Please note that the bowl is reusable, don't throw it away unless it is broken. 5. Regular inspection and replacement.