RTNLIT RGB Controller- RF Wireless Touch Remote LED Controler for LED Strip Light- DC12-24V

Controller: Supply Voltage: DC 12V-24V Output: 3 channels Connection mode: common anode Static power consumption: <0.5W Output current: 6A*3Ch=18A (6A Each channel) Working temperature: -30?~+60? Remote Control: Power supply mode: 3 * AAA Battery(No Battery) Supply voltage: 3V Static power consumption: <0.09mW Static current: 10uA Operating current: 15mA Remote controlled distance: >20M Stand-by time: 6 months Working temperature: -30?~+60? Note: This product should be debugged and installed by qualified personnel. This product is not waterproof, so please avoid the sun and rain. If installed outdoors, please use a waterproof box. Good heat dissipation conditions will prolong the life of the LED controller. Please install the product in a well-ventilated environment. Please check whether the output voltage of the LED power supply used meets the product voltage range requirements. The diameter of the wire used must be large enough to load the connected LED lamps, and ensure that the wiring is firm to prevent the wire from overheating or poor contact triggering accidents. Before power-on debugging, please ensure that all wiring is correct to avoid damage to the lamp due to incorrect wiring. Package Include: 1 x LED Controller 1 x RF Wireless Remote 1 x User Manual