RTNLIT 12V Dimmer Switch Wireless Touch Remote LED Controler for LED Strip Light

LED Dimmer: Supply Voltage: DC 12V-24V Output: Three open drain outputs Connection mode: common anode Static power consumption: <1W Output current: 6A*3Ch=18A (6A Each channel) Output power: 5V:<90W, 12V:<216W, 24V:<432W Working temperature: -20?~+60? Controller: Supply voltage: 3V Static power consumption: <0.09mW Remote-controlled distance: >20M Working temperature: -30?~+60? Note: This product should be debugged and installed by qualified personnel. This product is not waterproof, so please avoid the sun and rain. If installed outdoors, please use a waterproof box. Good heat dissipation conditions will prolong the life of the LED controller. Please install the product in a well-ventilated environment. Please check whether the output voltage of the LED power supply used meets the product voltage range requirements. The diameter of the wire used must be large enough to load the connected LED lamps, and ensure that the wiring is firm to prevent the wire from overheating or poor contact triggering accidents. Before power-on debugging, please ensure that all wiring is correct to avoid damage to the lamp due to incorrect wiring. Package Include: 1 x LED Dimmer 1 x RF Wireless Remote 1 x User Manual