Easy to Install:
Step 1: Shut off the water supply to the tub/shower. Step 2: Remove the knob center cap. Step 3: Unscrew and remove the knob. Step 4: Slide off the outside sleeve. Step 5: Remove the brass bonnet .try by hand first, or gently use channel-lock pliers. Step 6: Remove the old cartridge. Step 7: Feel for any deposits or debris inside pipe.clean as needed. Step 8: Insert the new cartridge. Step 9: Thread and tighten the brass bonnet. Step 10: If you remove the backing plate, clean the old caulk away and clean all parts. Step 11: Slide the outer sleeve back on. Step 12: Replace the backing plate and screw it in place. Step 13: Replace the knob and screw in place. Step 14: Replace the center cap.
Warm Tips:
There is a little gear inside which is a temperature adjustment on the cartridge, when the water is not hot enough, you can pull and turn to adjust, left side is colder, right side is hotter.
Specification: Name: RP46074 replacement cartridge Model Type: TYPE P shower cartridge Part Number: RP46074 Material: Metal & Plastic
Package Includes:
1PC x Valve Cartridge 2PC x Black Gasket
