Warning:
Please do NOT continuously use this product for more than 30 minutes to protect eyes and eye skin.
Tips:
Set temperature then start warm compression. Recommended to use at 50°C (122 °F) for 15-30 minutes. Timer Mode default setting 30 min.
Instructions:
1.Insert the USB insert into USB adapter (input voltage: 5V; output current?1A)
2.Connect the USB interface to the socket of the eye mask.
3.Adjust the temperature among 40 °C/ 104 °F, 50 °C/ 122 °F, 60 °C/ 140 °F.
4.Set the timer mode if needed
Specification:
Rated Voltage: 5V 2A
Rated Power: 10W
Package List:
1 x Sleep Mask
1 x USB Cable
1 x User Manual
Notice:
1.This product can be used directly as a normal eye mask.
2.Considering sensitive skin, if the temperature is too high for you, please shorten the using time or stop using to avoid low-temperature burns.
3.The heat eye is washable. If need cleaning, please handwash with water temperature below 40°C (104 °F).
4.If you have eye disease or eye injury, please use this product under the guidance of your doctor.
5.This product is not a toy, please put it out of the reach of baby.