RGB LED Strip Computer Lighting via Magnet with 24 Key Remote Controller for Desktop Computer Case Mid Tower Full Tower (5050 SMD 2pcs 18leds 30cm, R Series)

Specification Color: RGB LED Strip: 19.7 inches(with 7.9 inches Cable) / 50CM Number of LED Lights: 18 leds Led Type: 5050 SMD LED Magnets: Black Sintered NdFeB Permanent Magnets Extension Cable: 19.4 inches / 49.5cm Power Connect Cable: SATA Rated Voltage: DC 12V The control box comes with adhesive foam tape on the bottom. The power cable was a SATA to 12v cable instead The strip has no adhesive at all but attaches to the case via quarter of an inch magnets that inside the led strip. These magnets are super strong, and do not sag or get pulled down by the weight of the cables. They are even strong enough to hold the extra cables beneath them. The controller has 16 predetermined colors that are bright and distinguishable with 4 lighting effect, being strobe, flash, fade, and smoth. Installation: 1.Make sure that you have all the parts mentioned in the list. 2.Connect the molex connector to PC power supply and other end to the IR control box. 3.Peel off the paper and stick the adhesive tape back in a proper position in the PC case.(Notice: IR receiver on the control box show be seen so that you can use remote controller change light colours. 4.Connect 2 led strip lights to the 4-pin ends with the extension cable. 5.Attach the strips well on the metal surface of the PC computer case. Package Includes: 2 x 30cm 18leds 5050 RGB LED Striplighting 1 x SATA Connector Cable 1 x 24 key Remote Controller 1 x IR control box 1 x 4-pin extension cable Warranty If any defective products, please feel free to contact us, LEDdess will offer you a replacement or refund you.