Resin Tray Molds Large Silicone Molds Geode Agate Tray Mold Resin Casting Molds Platter Molds for Home Decoration DIY Craft Making -2Pcs

Package Includes: 2 X Resin Tray Molds 1 X Resin Gold Flake Size Details: 14 X 8.5inch 12.4 X 6.9inch Material: Silicone FAQ: How to Reduce Bubbles? 1) Warm your resin before use. 2) Mix the resin and hardener slowly and deliberately. 3) After you've completed mixing the resin and hardener together, wait more about 5 minutes. How to Make a Resin Tray: 1. Pour resin into measurement cup, slowly stir to release bubbles. Adding glitter into it if you need. 2. Pour it into your mold and slowly stir. Allow to stand for 24 hours and take it out. Warm Tips: 1-Please clean the molds and make sure they are clean before applying, so that you can get better crafts. 2-Please store the resin molds in room temperature place, please avoid the heat and sharp tool. Clean the mold after each use to maintain gloss and extend mold life. 3-How to demold: You could use a wipe or a drop of soap mix with a bit of water as the pop-out assistant, work it down to the mold, then push the project from the bottom. Note: Please make sure your resin piece is fully cured. 4. If using resin, please wait for 36-48 hours to let the resin completely cured. After that you just need to twist the resin mold and take out your artworks. If the time is too short, the resin maybe come out soft and easy to warp. 5. After squeezing and deforming, just rest for a while and then will return to the original state.