Resin Silicone Mold,Fashionclubs Resin Art Molds Include Round,Square,Pentagon DIY Epoxy Resin Mold Silicone Molds for Casting Coaster/Flower Pot/Ashtray/Pen Candle Soap Holder

Combines 3 shapes of resin art molds including Round, Square, Pentagon Shaped. You will have a lot of fun casting your own crafts by using these silicone molds for resin. Enjoy DIY The silicone resin molds are compatible with most resins or other casting materials such as epoxy resin, polyester resins, polymer clay etc. You can add some resin pigment, resin dye and embed different kinds of embellishments or fillers, create your resin art projects such as the flower pot, pen holder, succulent planter pot etc. Storage and Care Please store your resin molds in room temperature place, avoid from the direct sunlight. Clean these epoxy resin molds with soap water;for the finished products, there will also be rough edges that will need to be sanded and polished once removed from the mold but do not sand until the casting has fully hardened. Warm Tips for DIY Resin Crafts (1) How to make: Pour resin into measurement cup, slowly stir to release bubbles. Adding glitter or pigment into it if you need. Then pour it into your mold and slowly stir. Allow to stand for 24 hours and take it out. (2) How to clean: Please clean the resin casting molds with clean water or rubbing alcohol before use, then use a soft cloth to wipe clean. (3) How to store: Please store the resin mold away from direct sunlight and dust. (4) How to de-mold: You can use a mold release spray and let it dry in the mold. If you don't have, you may need a baby wipe or a drop of soap mix with a bit of water as a release agent, work it down to the mold, then push the project from the bottom. Please make sure your resin piece is fully cured when you decide to de-mold.