Rembam DT00911 Projector Replacement Compatible Lamp with Housing for Hitachi CP-X201 CP-X306 CP-X401 CP-X450 ED-X31 CP-X301 CP-X206 CP-WX410 HCP-960X

Rembam Information: Rembam has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality. Specifications: Part number:DT00911 Wattage:220W Specification:E19.5 Application:Business/Education/Home/School Compatible:for Hitachi CP-X201 Hitachi CP-X306 Hitachi CP-X401 Hitachi CP-X450 Hitachi ED-X31 Hitachi CP-X301 Hitachi ED-X33 Hitachi CP-WX410 Hitachi CP-X206 Hitachi CP-X467 Hitachi CP-WX401 Hitachi CP-X201 Hitachi CP-X206 Hitachi CP-X306 Hitachi CP-X401 Hitachi CP-X450 Hitachi CP-XW410 Hitachi ED-X31 Hitachi ED-X33 Hitachi HCP-6680X Hitachi HCP-900X Hitachi HCP-90X Hitachi HCP-960X Hitachi CP-WX410 3M X76 Package: 1 bulb with housing 1 Instructions sheet Installation: 1.Turn off the projector and unplug the power cord. 2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3.Loosen the lamp cover screw. Then slide the lamp cover off. 4.Loosen the two screws holding the lamp in place. 5.Hold the lamp as shown and pull it straight out. 6.Gently insert the new lamp. Then tighten its screws. 7.Replace the lamp cover, then tighten its screw. Notes: 1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp. 2.We provide excellent refund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.