RC Programming Card RC Car Electronic Speed Controller Programmer LED Program Card for RC Car 25A 35A 45A 60A 80A 120A 150AESC

Specifications: 1.This program box is used to program the brushless ESC,suitable for 1/8, 1/10, 1/12, 1/14, 1/16, 1/18 RC car. 25A, 35A, 45A, 60A, 80A, 120A ESC. 2.Start mode: Medium, soft, strong. Low Voltage Cut-off: 3.1V/Cell 2.9V/Cell 2.7V/Cell 0V/Cell. Max brake force: 25%, 50%, 75%, 100%; Max reverse force: 25%, 50%, 75%, 100%.Neutral range: 6%, 9%, 12%, work state. Size: 80x60x6mm (2.4 x 1.9 x 0.2inch). Weight: 26g (0.92oz). Function 1. Low voltage detection is 3.1V, 2.9V, 2.7V, no detection.(default 3.1V). 2. The start mode is normal, soft, and strengthened (default normal). 3. The maximum braking force (25A, 45A, 60A) is 50%, 25%, 75%, 100% (default 50%). (80A, 120A) 25%, 50%, 75%, 100% (default 25%). 4. The maximum reversing force is 25%, 50%, 75%, 100% (default 25%). 5. The width of the center point is 9%, 6%, 12% in sequence (default 9%). 6. BEC cable connection is connected according to the color direction. Program card operation method: 1. Connect BEC wires with the program car then turn on the ESC (Note: 80A,120A should be press the keys to be not put). 2. The Green LED flashes for 2 times then the LED off, that is, the connecting program car with ESC is successful, and the White LED presents the current value of that item. Otherwise, the connection is failed. 3. Press the Key "?" to select different programs. 4. Press the Key "?" to select the different values of the current program. 5. Press the Key "Program" to confirm the above selections, the Green LED on immediately and has gone out within 5 seconds, that is, this process is successful. Otherwise, programming fails. 6. Press the Key "Reset" to reset the factory setting. (reprogram after turning off the power). Package Including 1 x ESC speed controller program card white