Product Description:
The acoustic guitar pickup can take the plastic film down from the back of transducer to expose the adhesive.
Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response.
Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut .
Features:
Condition: 100% Brand New
Material: Environmentally friendly resin
Cable Length: Approx. 24.5cm / 9.65in
Jack Size: 6.35mm
Pickup Diameter: Approx. 3cm / 1.2in
Weight: Approx. 21g
Package Include:
1 x Piezo Pickup
1 x Velcro tape
1 x Sticker
FAQ:
?Where is the best place to stick the mics ?
Depends on what instrument you are trying to mic. Most instruments the best placement will be directly underneath the saddle/bridge.
?What is the little square plastic piece for ?
You can thread the wire tie thru it in place, then stick the square out of the way and secure the excess cable to it.
?How to use the Self-adhesive ?
Remove the plastic film from the back of the transducer to expose the adhesive.
