Radiolink R8EF 2.4G 8 Channels RC Receiver Support S-Bus/PPM/PWM for T8FB RC Transmitter

Radiolink is a high technology manufacturing company dedicated to researching, manufacturing and marketing of RC model radio transmitters. Our products included: RC transmitter, flight controller, receiver, GPS, drone etc. We are committed to providing customers with a high reliability and high performance product solution, as well as providing technical support and friendly after-sales service. Please note: 1.R8EF 8CH receiver only work with Radiolink transmitter products: T8FB. S-BUS and PPM signal change: 1.Quick press the ID SET switch 2 times within 1 second, the signal is changed from PWM to S-BUS&PPM. 2.Red LED indicates PWM signal output with 8 channels totally work, blue/purple LED indicates SBUS&PPM signal output, 8 channels totally work. 3.SBUS and PWM signal possible working at the same time with SBUS&PPM signal output working mode. CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal at the same time. How to match code with transmitter: 1. Put the transmitter and the receiver close to each other within 1 meters. 2. Turn on the transmitter, then power on the R8EF. 3. There is a black button on the R8EF, press the binding button one second and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on. Specifications: Channels: 8 channels Working voltage: 4.8-10V Working current: 30mA?input voltage: 5V? Size: 48.5*21*11mm/1.9*0.8*0.4in Weight: 7g/0.015lb 2048 section precision, 0.5us per section, servo anti-shake rudder. Control distance: about 500m ground and 1000m air, actually control distance depends on the environment. Package Included: R8EF receiver x 1