RadioLink R12DS 2.4GHz RC Receiver 12CH SBUS/PWM Voltage Telemetry Long Range Remote Control for RC Transmitter AT10II AT9S Pro

DSSS&FHSS reduce overall signal interference allow the R12DS to produce a highly constant and stable transmission signal. Please Note: 1. R12DS only work with Radiolink transmitter products: AT9S Pro, AT9S,AT9,AT10,AT10II. 2. Short push the ID set switch 2 times within 1 second it can change signal, while the LED change to red, it indicates PWM signal output, the blue/purple LED indicates SBUS signal output. 3. Please make sure your Radio's alway 12CH, go to your radio MENU—SYSTEM—CH-SELECT: 12CH 4.Anti-polarity Protection: With reverse polarity protection circuit, won't damage the receiver even you plug wrong polarity. 4.6-10v DC, support high voltage servo. How to Match Code With Transmitter: 1. Put the transmitter and the receiver close to each other within 50cm. 2. Turn on the transmitter and R12DS. 3. There is a black button on the R12DS, press the binding button 1 second and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on. 4. The antennas must be keep as straight as possible. Otherwise it will reduce the effective range. Specifications: Signal: SBUS,PWM Channel: PWM 12 channels, SBUS 12 channels Working Voltage: 4.8-10V Working Current: 38-45mA?input voltage: 5V? Size: 1.97*1.26*0.59in Weight: 0.5oz Package Included: R12DS receiver x 1